Stand Air Conditioning Services
We do stand AC maintenance services such as air conditioning cleaning, repair and gas filling.
See services description below for more details.
List of Services
-
Full Cleaning (Water only)List Item 1
Cleaning the Floor Standing ACs' inner and outer units using water pressure.
-
Indoor Filter Cleaning + Outdoor Water CleaningList Item 2
Cleaning the Indoor units filter only and cleaning the outdoor unit using water pressure.
-
Gas Filling (R22)List Item 3
Measure the Floor Standing ACs' compressor gas pressure and refill to the appropriate level. [R-22].
-
Gas Filling (R410)List Item 4
Measure the Floor Standing ACs' compressor gas pressure and refill to the appropriate level. [R-410]
-
Gas Leak finding + Fixing
Locating the leakage point in the Floor Standing ACs' system and fixing it.
-
Change Capacitor
Replacing the Stand ACs' capacitor [include capacitors' cost]
-
Fixing Water Leakage
Flushing the drainage pipes in the Floor Standing ACs' system to remove any blockage.
-
Replacing Compressor
Replacing the Floor Standing ACs' old compressor with a new one. [Does not include the new compressor costs].
-
Fixing AC air swing device motor
Fixing the motor for the Floor Standing ACs' air swing device.
-
Replacing Inner Unit Blower
Replacing the fan blower in the inner unit of the Floor Standing AC.
-
Replacing Outer Unit Fan
Replacing the Floor Standing ACs' outer unit fan.
-
Fixing Outer Unit Fan
Fixing the Floor Standing ACs' outer unit fan [Includes removing the existing fan and putting it back].
-
Installation
Installing the Floor Standing ACs' outer and inner units.
-
Removal of AC
Removing the Floor Standing ACs' outer and inner units.
-
Fixing Electrical Board
Fixing the Floor Standing ACs' electrical board [Includes removing it and putting it back on].
-
Changing Electrical Board
Replacing the Floor Standing ACs' electrical board.
-
Drainage pipe installation
Installing drainage pipe for Floor Standing Ac.
-
Fixing Rely termique including material
Supply and Installing relay for Stand AC
-
Change fan capacitor
Change the fan capacitor of the stand air conditioner
-
Change wire output inside the wall
Replace the electrical wire between the outdoor and indor unit
-
Change insulation pipe outside the wall
Replace the insulation on the copper pipe that is outside of the wall in the indoor unit [excludes the copper pipe]
-
Change insulation pipe inside the wall
Replace the insulation on the copper pipe that is inside the wall between the indoor and outdoor unit [excludes the copper pipe]
-
Removal of AC and Cleaning
Remove the indoor unit, cleaning it and re-install it for Standing AC - includes cleaning the outdoor unit.
-
Change copper pipe / meter
Installing the copper piping for Standing AC.
-
Flushing copper pipe AC
Clean the copper pipe by flushing it for Standing AC.
